Wonderstone
Natural mineral plaster
without cement,
ready to use for
floors and walls.
About Wonderstone
Wonderstone is an innovative, ready-to-use plaster made from clay and quartz. It gives any surface the authenticity and robustness of natural stone. With a mineral appearance, resembling polished concrete, it is tinted using natural pigments. Wonderstone is a pre-tinted powder that only needs to be mixed with the specified amount of water. Easy application in two thin layers, wet-on-wet
specifics
for large surfaces
Ready-to-use
Thin
Non-cement - sustainable - clay based
Doesn't dry in his bucket
Flexible
Wonderstone
In
SaltWS.06
Seen at
Hyde(BE)
Wonderstone
In
SaltWS..06
Seen at
Sessùn Brussels(BE)
Advantages
- Mineral appearance of béton ciré look for interior walls and floors
- Clay based.
- Great for large surfaces
- Guaranteed cement-free
- Pre-tinted powder, only to be mixed with water.
- Available in 20 colors
- Very simple and non-toxic application, in two layers, wet-on-wet.
- Can be stored for approximately 15 days already mixed – no material wasting
- Very flexible
- Drying time for the first layer before applying the second, reducing the risk of overlaps or seams.
- High performance under intense traffic.
- Total thickness of approximately 2 mm.
- Very easy application for any professional with experienced in in using a trowel.
Destination
Finishing plaster, ideal for floors, interior walls
Composition
Composed of clays, rock powders, natural pigments and a polymer powder binder. Guaranteed cement-free.
Unique
Pre-tinted powder to be mixed with the indicated quantity of water.
Application
Simple and easy to apply, in two fresh-on-fresh coats
Use
Ultra-resistant , withstands heavy traffic
Thickness
2mm
Protection
Protective varnish suitable for each use.
Color
Available in 20 colors.
Packinging
Kit ±10m²: 15kg of tinted powder
Mini-kit ± 3m²: 5kg of tinted powder
The prepared mixture can be kept for several days.
Mini-kit ± 3m²: 5kg of tinted powder
The prepared mixture can be kept for several days.
High protection for FLOORS and WALLS
2 layers of AquaSeal applied with a microfiber roller (8-9mm nap). 0.12L/m² in 2 layers.
Drying time for the first layer: at least 2 hours at room temperature.
Complete drying: at least 16 hours.
2 layers of PerfectSealNew applied with a microfiber roller (8mm nap). 0.183L/m² in 2 layers.
Drying time for the first layer: at least 1 hour at room temperature.
Drying time for 2 layers for normal traffic: at least 48 hours.
Complete drying time for 2 layers for heavy traffic: at least 72 hours.
High protection for walls
1 layer of AquaSeal applied with a microfiber roller (8-9mm nap). 0.08L/m² in 1 layer.
Complete drying: at least 16 hours.
+ 2 layers of PerfectSealNew applied with a microfiber roller (8mm nap). 0.183L/m² in 2 layers.
Drying time for the first layer: at least 1 hour at room temperature.
Drying time for 2 layers for normal traffic: at least 48 hours.
Complete drying time for 2 layers for heavy traffic: at least 72 hours.
Medium breathable protection for walls
2 to 3 layers of PerfectProtect applied with a microfiber roller (9mm nap). 0.18L/m² to 0.24L/m².
Drying time between layers: at least 1.5 hours.
Final drying time: 24 hours.
Nuancier
Wonderstone est disponible en 20 couleurs.
WS.01
WS.01
Rose
WS.02
WS.02
Pinky
WS.03
WS.03
Latte
MS.04
MS.04
Blush
WS.05
WS.05
Rope
WS.06
WS.06
Salt
WS.07
WS.07
Sand
WS.08
WS.08
Corn
WS.09
WS.09
Pearl
WS.10
WS.10
Rabbit
WS.11
WS.11
Snow
WS.12
WS.12
Mist
WS.13
WS.13
Stern
WS.14
WS.14
Lagoon
WS.15
WS.15
Mouse
WS.16
WS.16
Pigeon
WS.17
WS.17
Elephant
WS.18
WS.18
Charcoal
WS.19
WS.19
Pine
WS.20
WS.20
Duck
A specific interior project?
ClayLime supports its customers and guarantees the best results in terms of aesthetics and performance. We can recommend the most qualified installers in your area.
Fill in our contact form and tell us a little more about your project. We will then be delighted to recommend the best installer for your project.